Steel Cabinets

Smart production of your Cabinets

For the production of office, drawer, filing and fire cabinets, our production lines offer possibilities for products of various sheet thicknesses (0.4 to 1.25 mm). By integrating different processes and a robot cell within one single machine concept, these lines are able to produce a complete cabinet. Moreover, in combination with our standardised modular construction.

  • (pre-painted) steel
  • 0.4 - 1.25 mm
  • 8 p/min

Product

Our production lines produce office, drawer, filing and fire cabinets from different materials, such as normal steel and pre-painted steel. This enables you to produce a wide range of cabinets. All panels can be separately produced. If necessary, the entire cabinet can be welded together with the help of a robot cell.

Production line for Cabinets

With our production lines, we can not only deliver a high productivity for the shelves, but also a high flexibility for the complex doors and side panels with special door and catch shapes. Our production lines deliver the highest output (up to 8 panels per minute) for a stand-alone production concept. Our production lines also delivers a logistical saving by the innovative production of profiles on the same line.

References

Customised advice?

Drawers

Simple adjustments with no downtime

For the production of drawers, our production lines offer various possibilities for products with different sheet thicknesses (0.4 to 1.25 mm).

The high output results in the lowest cost price per product. In combination with our standardised, modular construction, you can moreover easily expand your production process.

  • Mild steel CR4
  • 0.4 - 1.25 mm
  • 10 p/min

Product

The production lines for drawers offer possibilities for products of various sheet thicknesses (0.4 to 1.25 mm). The lines deliver a high output of up to as much as 10 panels a minute. Automatic application of the rail holders results in direct logistical savings.

Production line for Drawers

These innovative production line produce drawers for tool trolleys, office furniture and filing cabinets. Without having to adjust the bending tool, these lines can produce several models and drawer heights (from 50 to 200 mm). During production, bending angle adjustments can be made without stopping the line. Thanks to the high quality welded seams, no extra post-processing is needed before the product is painted. These properties result in high productivity and flexibility. 

Customised advice?

Shelving brackets

Unique possibilities in just one production line

The production line for Shelving Brackets offer possibilities for products of various sheet thicknesses (1 to 3.5 mm). By integrating the high speed of the punching cylinders, these lines are able to deliver the highest output. This results in the lowest cost price per product. In combination with our standardised, modular construction, you can moreover easily expand your production process.

  • Galvanised or High-Strength Steel
  • 1 - 3.5 mm
  • 30 - 60 p/min

Product

WEMO makes production lines which produce Shelving Brackets from various materials, such as normal steel, galvanized steel and high tensile steel of up to as much as 800 N/mm2. This enables you to produce a wide range of Shelving Brackets.

Production line for Shelving Brackets

We can integrate the high speed of the punching cylinders within just one production concept in our production lines. This results in a high output (from 30 to 60 hooks per minute), with which we guarantee the high productivity of our machines. Using a smart combination of two smaller, flexibly adjustable and programmable tools, all hook lengths can be made with the same tools. This ensures a direct saving on your tool costs. Moreover, our production line delivers material savings by in-line pressing the reinforcement grid in the hook.

References

Customised advice?

Lockers

The world's fastest production line for Lockers

For the production of lockers, our fast production lines offer possibilities for products of various sheet thicknesses (0.4 to 1.25 mm). By integrating different processes and a robot cell within one single production concept, these lines can produce a complete locker. In combination with our standardised, modular construction, you can moreover easily expand your production process.

  • (pre-painted) steel
  • 0.4 - 1.25 mm
  • 8 p/min

Product

Our production lines produce lockers from different materials, such as normal steel and pre-painted steel. This enables you to produce a wide range of lockers. All panels can be separately produced. If necessary, the entire locker can be welded together with the help of a robot cell.

Production line for Lockers

With our world's fastest production line we deliver high productivity as well as high flexibility for the lockers. Our lines deliver the highest output for a stand-alone production line concept. Our production line also delivers a logistical saving by the innovative production of profiles on the same machine.

References

Customised advice?

Shelving

Guaranteed high bearing capacity of the Shelving

Our production lines produce File Shelving, Cabinets Shelving, Store Shelving, and Heavy load Shelving. These products can be used at home, supermarkets, large warehouses and logistics centres. Thanks to the large variety of complex and extremely strong corner joints, our production lines guarantee maximum bearing capacity of the Shelving unit (up to a maximum of 300 kg). In combination with the high productivity of the lines, we emphasise our quality and the lowest cost price per product.

  • Steel
  • 0.4 - 1.25 mm
  • 4 - 40 p/min

Shelving products

Thanks to the strong corner joints and clicked and welded or otherwise connected reinforcement profiles and bent tube shapes or double-bent edges, our sheet metal machines deliver Shelving with an extremely high bearing capacity. Moreover, these features ensure welcome cost savings and space economy. Our lines can apply information to your products, such as your company logo, batch number or maximum bearing capacity.

Sheet metal machines for Shelving

WEMO sheet metal machines produce Shelving at an output of a minimum of 4 to a maximum of 40 products a minute. This is made possible by combining the roll-bending and bending processes in one single production concept. The sheet metal machines process any embodiment by means of the freely programmable tube shapes on the long side or on the front side. Our machines produce accompanying rear panels without extra investments in bending or profiling tools. Combining different applications (feeding, punching, bending and joining) makes the production of total Shelving units packages possible.

References

Customised advice?

Uprights

Go for versatility

The production lines for uprights offer possibilities for products of various sheet thicknesses (1 to 3.5 mm). By integrating different processes within just one production concept, these lines are able to deliver the highest output. This results in the lowest cost price per product. In combination with our standardised, modular construction, you can moreover easily expand your production process at no extra cost.

  • Galvanised or High-strenghted steel
  • 1 - 3.5 mm
  • 40 m/min

Product

WEMO production lines produce uprights from various materials, such as normal steel, galvanized steel and high tensile steel of up to as much as 800 N/mm2. This enables you to produce a wide range of uprights.

product photo of uprights made with a WEMO production line

Production line for Uprights

In our production lines we can fully integrate the punching cylinder and roll-bending processes within just one production concept. This results in a high output (up to 40 metres per minute), with which we guarantee the high productivity of our lines. With our compact pre-punching tools you can easily adapt your forming process. Buffering profiles at the removal table enables unmanned operation of these lines.

Customised advice?