Fridge doors

Complex bending

WEMO makes production lines for the production of top panels and side panels for fridges. The set-up of these production lines is flexible, so that they can be easily expanded. Thanks to the high output of our lines we can guarantee the lowest costs per product. These production lines for the domestic appliances industry are suitable for the scratch-free processing of different materials, such as bright steel, pre-painted or stainless steel with or without protective film.

  • Steel
  • 0.4 - 0.7 mm
  • 9 - 18 p/panel

Product

Our production lines produce top panels and side panels with different sheet thicknesses (0.4 to 0.7 mm) for fridges. The lines offer a large variety of complex bending in order to provide optimal clamping for the fridge's rubber seal profile. The production lines are suitable for processing various different materials.

Production line for Fridge doors

WEMO production lines produce panels at an output of 9 seconds per side panel and 18 seconds per top panel. The cut to size sheets, of various colours, are loaded in a two, four or even eight-fold feed-in station. The lines are fitted with software with plenty of programme options, for instance a batch production of side panels left/right/left/right. Correcting the bending parameters can be done without stopping the lines. Just one single employee is needed for taking off the bent components.

References

Customised advice?