Sheet Metal Production Lines for Ceiling Tiles

WEMO sheet metal production lines produce Ceiling Tiles up to a length of 4000 mm and a width of 1500 mm. Here, facet bent corners are seamlessly drawn in an innovative manner. These high quality sheet metal production lines are suitable for processing aluminum, steel and stainless steel. The high output of our sheet metal production lines guarantees the lowest costs per product.

  • aluminium or (stainless) steel
  • 0.5 - 2mm
  • 6 p/min

Ceiling Tiles Products

WEMO sheet metal production lines produce Ceiling Tiles up to as much as seven meters long. All types of perforated Ceiling Tiles can be processed. The sheet metal production lines offer you total freedom in all product shapes and all Ceiling Tiles are produced in accordance with the TAIM standard.

PBL-4000: sheet metal production line for Ceiling Tiles

Our sheet metal production lines produce fully-automatically – so without manual adjustment for length, width or height – from a production capacity of one item. Moreover, the production lines process all types of perforated Ceiling Tiles. With these lines we offer you quality, flexibility and modularity. These production solutions can be simply extended with other applications thanks to the standardization of our modules.

Videos

References

Customised advice?

Sheet Metal Production Lines for Steel Door Frames

WEMO stands for quality, flexibility and productivity. We do that with our modular production lines which can for instance be easily extended into unique customisation for any client. Our production lines for Steel Door Frames offer an enormous number of possibilities for countless products. From a diversity of depths and widths to unique shapes. The high output of our lines emphasises once again our power in productivity.

  • Pre-painted material
  • <1.5 mm
  • 3 p/min

Steel Door Frames products

So many Steel Door Frames, so many possibilities. We demonstrate that with our production lines, which can produce an extremely wide range of door frames .The lines are suitable for different frame depths, frame widths, wall thicknesses and frame shapes. The lines make door frames with a sheet thickness of up to 1.5 mm. Our lines also guarantee a scratch-free finish of pre-painted material.

Sheet Metal Production Line for Steel Door Frames

WEMO production lines stand for flexibility and productivity. The high output of these lines (up to four frame parts per minute) guarantees low costs per product. Moreover, the bending process is monitored by a bend angle error correction system in the production line. The standardised, modular construction means that you can now connect your production process to the parallel production of your door frames, a unique possibility.

Customised advice?

Sheet Metal Production Lines for Electrical Enclosures

Optimizing your production targets starts with high quality smart sheet metal production lines. For this we make punching and bending lines which can produce several products simultaneously. For instance, the Casing, Mounting plate as well as the Doors of Electrical Enclosures. This added value offers solutions with which you can optimize your production. For today and tomorrow.

  • (stainless) steel
  • >2mm
  • 4 p/min

Electrical Enclosures products

Electrical low and high voltage enclosures (up to 2 mm thick) are constructed of casing and covers with special bending (cabinet depths up to 400 mm from one piece) in which different fixing components and safety components are mounted. Our production lines can automatically add these products, leading to direct savings in your production process. In combination with the high output (up to four products per minute) our added value speaks for itself.

Production lines for Electrical Enclosures

WEMO designs unique and flexible solutions for the production of casing and covers for Electrical Enclosures in the electronics industry. These fully-automatic punching and bending lines deliver a high output against low costs. By automatically adding fixing components and connections, our production lines ensure substantial savings. In combination with the superior quality (100% closed corners), this ensures continual optimisation of your production process.

References

Customised advice?

Sheet Metal Production Lines for Elevator Panels

With our sheet metal production lines for Elevator Panels we can offer you a solution for both basic panels and decorative panels. Moreover we guarantee a high production output in accordance with the latest European and Chinese directives. This emphasizes our high quality, flexibility and productivity. The sheet metal production lines produce Elevator Panels from various materials such as steel, stainless steel, pre-painted or laminated steel.

  • stainless, pre-painted or laminated steel
  • 0.6 - 1.5 mm
  • 8 p/min

Elevator Panels products

WEMO sheet metal production lines for Elevator Landing Doors and Car Wall Panels are suitable for materials with various sheet thicknesses (from 0.5 to 2 mm). The sharp bending radius ensures Elevator Panels with a perfect seal. These sheet metal lines can be simply extended using our standardized, modular options.

PBL-2550: sheet metal production line for Elevator Panels

Our sheet metal production lines deliver Elevator Panels in any embodiment required. This guarantees you the highest output (up to 6 products per minute) for the lowest price per product. Our lines combine the power of simplicity in operation (one operator) with production (infeed, punching, bending and joining). Moreover, the clinch or spot welding process can easily be integrated so that optimal door rigidity is always achieved.

Video’s

References

Customised advice?

Sheet Metal Production Lines for Boiler Covers

Low costs per product. Smart lines with several possibilities for maximising your production of boiler casings in the heating industry. Resulting in lower costs per product. For this we designed production lines which you can fit in entirely with your own objectives. This is where we make the difference. In quality, in output and in your economic value.

  • pre-painted material
  • 0.6 – 0.9 mm
  • 2 - 5 p/min

Boiler Covers Products

Our fully-automatic punching and bending lines make boilers, sheeting for central heating boilers and designer radiator covers in the heating industry. The lines can be simply extended for making fixing components and connections. Our punching and bending lines can process products scratch-free from pre-painted material. This means that combining with a painting process is completely unnecessary.

Production line for Boiler Covers in the heating industry

Flexible production demands flexible lines. For instance, our punching and bending lines for making casings in the heating industry. With these fully-automatic lines, it is possible to add fixing components or connections. In combination with the high output (of 2 boilers to as much as 5 casings per minute), this results in a direct saving of production costs.

WEMO references for production lines for the heating industry
 

Customised advice?

Sheet Metal Production Lines for Indoor Luminaires

Our production lines for the lighting industry offer you countless flexible solutions for the most diverse lighting products. Moreover, our production lines deliver the highest output against the lowest costs. To achieve this, we make use of a revolutionary bending technique, so that changing tools and adjusting the line is no longer necessary. Thanks to our modular line programme, any extensions required can be easily implemented. 

  • pre-painted material
  • < 0.4 mm
  • 7 p/min

Indoor Luminaires Products

For lighting fixtures, fitting boxes and flush-mounted boxes for fluorescent lighting to LED light boxes and mirror reflectors; WEMO builds unique and flexible production lines for the lighting industry. By making use of for instance a unique punching template for LED light boxes, no extra steel components need be supplied. You make the difference with our production lines. Resulting in more products for less money.

Sheet Metal Production Lines for Indoor Luminaires

Our production lines offer unique solutions for plenty of applications. From flexible punching and bending, an integrated clinching process (precise and lightproof corners) and scratch-free processing of pre-painted material to processing thin material of up to 0.4 mm and automatically pressing out clips from the base material. Moreover, the cost price does not depend on the order size; even a batch size of 1 item is an option. Our production lines can achieve an output of up to 7 products a minute.

References

Customised advice?

Sheet Metal Production Lines For Roller Shutter Boxes

The flexibility of WEMO production lines for Roller Shutter Boxes goes further than you think. Besides the standardised, modular options for our lines, we also offer you effortless applications for products with different sheet thicknesses (from 0.7 to 1.2 mm) and protective film if necessary. Moreover, the high output (up to 21 metres a minute) resulting in low costs per product speaks for itself.

  • (pre-painted)) aluminium
  • 0.7 - 1.2 mm
  • 21 m/min

Roller Shutter Boxes products

With WEMO production lines you can produce Roller Shutter Boxes your own way. With different shapes – such as round, half-round and square or roller shutters with an oblique angle – or with different lengths; from a minimum of 400 to a maximum of 7000 mm. The perfect bending tolerance means that the production lines can effortlessly work aluminium, bright or pre-painted sheets without scratches, and with or without protective film.

Production lines for Roller Shutter Boxes

Our production lines deliver a high output of up to as much as 21 metres a minute. Our stand-alone rolling, press braking and bending line can moreover be simply integrated in your existing production process. The roller shutter boxes can be produced in any embodiment required and, depending on the total line concept, can be produced in a batch size of one item. Just one single employee is needed for taking off the bent components.

References

Customised advice?

Sheet Metal Production Lines for Steel Doors

Flexible sheet metal processing lines; that is the strength of WEMO. With our lines’ standardized, modular options, we also offer you effortless applications for Steel Doors with different sheet thicknesses (up to 2 mm). With the high output (up to 3 complete doors per minute) we guarantee the lowest costs per product.

  • (stainless) steel
  • 0.5 - 2mm
  • 3 p/min

Steel Doors products

Steel Entrance Doors, Fire Rated Doors and Industrial Doors: with the WEMO sheet metal processing lines you can produce Steel doors your own way. We offer you the option of Steel Doors with or without embossing. The perfect bending tolerance enables the production lines to process steel and stainless steel effortlessly.

PBL-2550: sheet metal production line for Steel Doors

Our sheet metal production lines deliver a high output of up to as much as 3 Steel Doors a minute. The Door consist of two parts; the Box (A) and the Cover (B). The batch production A-B-A-B is one of the standard programming functions of this line. Thanks to the modular construction, we are able to always guarantee the perfect solution. Just one single employee is needed for taking off the bent components.

Videos

Other production line videos

References

Customised advice?

Sheet Metal Production Lines for Wall Systems

WEMO sheet metal production lines produce Interior Wall Systems up to a length of 4000 mm and a width of 1500 mm. Here, facet bent corners are seamlessly drawn in an innovative manner. These high quality production lines are suitable for processing aluminum, steel and stainless steel. The high output of these production lines guarantees the lowest costs per product.

  • aluminium or (stainless) steel
  • 0.5 - 1.5 m
  • 8 p/min

Interior Wall Systems products

WEMO production lines produce Interior Wall Systems e.g. for the inside of buildings, industrial cold rooms and ship cabins. The production lines offer you total freedom in all product shapes with or without PVC-coating.

PBL-4000: sheet metal production line for Wall Systems

Our sheet metal production lines produce fully-automatically – so without manual adjustment for length, width or height – from a production capacity of one item. Moreover, the production lines process all types of Interior Wall Systems. With these lines we offer you quality, flexibility and modularity. These production lines can be simply extended with other applications thanks to our module standardization.

Video

Customised advice?